View source for VV-898S Tips

= Programming Repeaters =

==Set the frequency==

1) Switch to VFO mode using V/B button

2) Enter the frequency

3) Press M for the menu

4) Menu 10: Ensure "ENC Type - 10" is CTC

5) Menu 11: Set the CTC tone

6) Menu 30: Set power.

7) Menu 35: Set Repeater offset.

8) Menu 36: Set + or - offset.

9) Menu 51: Ensure wide band.

10) Menu: 5: Save then Chanel in a free block.

==Name the Channel==

1) Switch to Chanel mode using the V/M button.

2) Press menu

3) Menu 20: Check name sys is on.

4) Menu 21: Change name channel to on.

5) Menu 22: Edit the name

* P1 Enable cursor
* P2 Next character
* P3 Save
* Power - Exit