✍️ Verified Author: Mflavell • Click to view professional profile & credentials

Latest revision as of 16:44, 29 July 2024

Programming Repeaters

1) Switch to VFO mode using V/B button

2) Enter the frequency

3) Press M for the menu

4) Menu 10: Ensure "ENC Type - 10" is CTC

5) Menu 11: Set the CTC tone

6) Menu 30: Set power.

7) Menu 35: Set Repeater offset.

8) Menu 36: Set + or - offset.

9) Menu 51: Ensure wide band.

10) Menu: 5: Save then Chanel in a free block.

1) Switch to Chanel mode using the V/M button.

2) Press menu

3) Menu 20: Check name sys is on.

4) Menu 21: Change name channel to on.

5) Menu 22: Edit the name

@@ Line 1: / Line 1: @@
-= Programming =
+= Programming Repeaters =
+==Set the frequency==
 ) Switch to VFO mode using V/B button
-) Enter designed frequency
+) Enter the frequency
 ) Press M for the menu
 ) Menu 10: Ensure "ENC Type - 10" is CTC
 ) Menu 11: Set the CTC tone
 ) Menu 30: Set power.
 ) Menu 35: Set Repeater offset.
 ) Menu 36: Set + or - offset.
 ) Menu 51: Ensure wide band.
 ) Menu: 5: Save then Chanel in a free block.
-) Switch to Chanel mode using the V/M button
-) Press menu
+==Name the Channel==
-)
+) Switch to Chanel mode using the V/M button.
+) Press menu
+) Menu 20: Check name sys is on.
+) Menu 21: Change name channel to on.
+) Menu 22: Edit the name
+* P1 Enable cursor
+* P2 Next character
+* P3 Save
+* Power - Exit